Stone is extremely fragile in the process of handling and unloading. We should pay attention to some matters in the process of stone handling. How to avoid unnecessary and undesirable dangers? Let’s analyze them below.

Preparations before handling should be based on prevention. It can be prepared according to different modes of transportation. Foam backing should be used on the workpiece surface, and two crossbars should be installed at the bottom, so that the loading and unloading and packing must be firm

When applying cranes or trucks, attention should be paid to the strong and reliable wire rope. When loading and unloading stones with cranes, check the surrounding buildings for high voltage wires and obstacles.

Handling should be smooth. Before and after loading and unloading, the porters should wear gloves instead of slippers.
Vehicle handling forms are the most and accidents are frequent. Trains, ordinary cars and large tonnage vehicles can be roughly divided into containers and sealed containers. Open-air discharge is strictly forbidden for stone hoisting row and horizontal row, which should be in line with the direction of operation and reduce losses. Its height and angle are suitable for the plate, and the iron frame should be paired neatly to reduce the impact and friction; it is strictly forbidden for the porters to ride on the stone.

We must choose a good car, especially when transporting large slate, never let the sick car go on the road. The central frame should be firm; vehicles should slow down when they encounter mountain roads, rain and snow, strong winds or passing people, with special care. Don’t make sharp turns or brake. Loading according to the product, reduce the edge angle, wear and tear. Above are the matters needing attention in stone handling and handling. Through the introduction above, we can better understand the protection of stone and some knowledge that stone should pay attention to.