How to select stone materials professionally

How to select stone materials professionally
With the continuous improvement of people’s living standards, the purchasing power of housing is increasing. People are buying and decorating houses, and pursuing high-grade decorative materials has become a new fashion. Among many materials, stone is widely used.
Stone has natural color, rich texture, hard and thick surface, strong corrosion resistance, wind resistance, rain resistance and other advantages, and has absolute advantage in durability.
In order to endow them with long-lasting product quality, developers choose beautiful, thick and permanent stone materials in their materials, not only considering the promotion of sales, but also out of their own enterprise ideal. However, at present, there are many stone factories in the market, so it is necessary to have some knowledge of choosing stone materials.
Born with beautiful nature, you can see “gold”
Just as Dongshi can’t compete with Xishi in any way, good natural stone decorative board depends on the quality and processing technology of waste materials.
The color of high-quality stone surface pattern does not contain too many variegated colors, even cloth colors, and there is no situation of light and thick, and there will be many “defects” that cannot be covered after the processing of inferior stone. Therefore, the color of stone surface pattern is an important index to evaluate the quality of stone. However, stone is a natural product, color difference is common, and serious problems can be avoided by selecting and typesetting. For a small number of changes may also increase the level of space decoration.

20190723145753_6461

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In the process of stone processing, the surface needs to go through cutting, sawing, grinding, polishing and other processes, and its beautiful “appearance” can be shown. If the processing technology and process are not up to standard, the finished products after processing will appear warpage, depression, color spot, stain, missing edge and angle, crack, color spot, color line, pit and so on, which cannot be “compatible” with the top products.
In addition, the whole stone is not flat, the arched curved arch plate and the small axe plate on one side are also secondary plates. After paving, the surface will be uneven and the joints will be uneven. Especially in the process of facade decoration, the irregular decorative surface line shape will affect the overall decoration effect.
The cutting edge of high-quality natural stone plate is neat without missing angle, the surface is bright and clean, the brightness is high, and there is no rough feeling when touching with hand. In the selection of stone materials, in addition to the decorative properties such as color and pattern, glossiness and appearance quality, the physical and chemical properties such as compressive strength, flexural strength, durability, frost resistance, wear resistance and hardness should also be considered.
When choosing stone materials for interior decoration, we should pay attention to the different texture of stone materials in different parts. We should choose materials according to hardness, color, wear resistance and other factors.
The cabinet table, the door stone, the wave dozen line, the ladder step platform mainly uses the stone with relatively strong rock hardness, the color is relatively deep and easy to handle, the color difference is small, but also rich in the sense of hierarchy, will not produce the feeling of frivolity;
The stone materials with relatively weak rock hardness, various colors and beautiful texture can be selected for the floating window table, decorative wall, ground stone and toilet table. For example, the light color of floating window and ground can give people a warm and quiet feeling, and also can visually “expand” the area.
It is better not to choose dark stone to pave on the ground in large area, which will make people feel “dark”. If decorate a wall to be able to choose cream yellow or white stone, appear atmosphere is succinct. In addition, considering the strength of the decoration and the bearing capacity of the house, we should try our best to choose the thin stone.
Reasonable application, infinite charm
Although stone has a good decorative function, it should be coordinated with the surrounding environment in the process of use, especially when a variety of colors are combined, it should not only coordinate with itself, but also with the surrounding natural color, otherwise, the situation of “wearing a suit and cloth shoes” will appear.
In general, the living room and other large areas of “public space” the best ground with white, beige and other light tone products.
Because, light color and all kinds of furniture can achieve a perfect combination, which will give you a more changeable stage to show your personality; dark color will make the surrounding environment appear bright, but large area of use or improper collocation will produce a sense of depression.
Like some small area mesa and so on embellishment sex adornment best uses the dark color product, like this can have the function of the finishing touch already, with will not make the person produce the light floating feeling.
Stone with natural beautiful patterns and colors has more unique charm than other industrial products. It provides designers with broad design space, while pursuing nature and advocating green environmental protection becomes fashionable, more and more people are using some natural stone in family decoration.
Good natural stone decorative board depends on the quality of the waste material and processing technology. The color of high-quality stone surface pattern does not contain too many variegated colors, even cloth colors, and there is no situation of light and thick, and there will be many “defects” that cannot be covered after the processing of inferior stone. Therefore, the color of stone surface pattern is an important index to evaluate the quality of stone.
If the processing technology and process are not up to standard, the finished product after processing will appear warpage, depression, color spot, stain, missing edge and angle, crack, color line, pit, etc., which cannot be “compatible” with the top product. According to the expert who specializes in processing and selling imported stone, the cutting edge of high-quality natural stone plate is neat without missing angle, the surface is bright and clean, the brightness is high, and there is no rough feeling when touching with hands.
At the same time, in the selection of stone materials, in addition to the decorative properties such as color and pattern, glossiness and appearance quality, the physical and chemical performance indexes such as compressive strength, flexural strength, durability, frost resistance, wear resistance and hardness should also be considered.
Pre use care and treatment
Because of the natural existence of micro pores in stone, the smaller the pores, the stronger the capillary adsorption on the surface, many diseases of stone are “disease from the pores into”.
There are usually two “pollution ways” to absorb dirt, absorb dirt and cause pathological changes after the paving of stone materials: one is from the surface of stone materials, which is difficult to clean up when colored liquid such as coffee, tea, ink and other small dust, biological corrosion of its body.
Since the stone needs to be maintained, some processing enterprises and consumers will wax the surface of the stone to protect it. However, when the wax is covered on the surface of the stone, the pores on the surface of the stone will be blocked. During the second maintenance, the existing wax on the surface of the stone will become an obstacle for the protection to penetrate into the interior of the stone.
At this time, the cement or adhesive between the stone and the ground will slowly “invade” the body of the stone due to moisture or chemical reaction, resulting in the stone alkali return and color spots and other lesions. This kind of “surface articles” can not only cure the stone diseases, but also aggravate them, which is another “pollution way” to produce stone diseases.


Post time: Oct-25-2019

Newsletter Stay tuned for Updates

Send
WhatsApp Online Chat !