The methods and styles of door jamb lines are very diverse, and using stone to make door jamb lines is also a very important part. Let’s understand the styles and applicable styles when using stone to make door jamb lines.
Stone door pocket line style one: single layer flat line
Single layer flat panel line mode
When using single-layer stone flat plates to make door jamb lines, the width of the door jamb line is generally around 60mm-120mm, which should not be too wide or too narrow. There are mainly inclined edges, circular edges, slot embedded titanium bars, slot embedded copper bars, and slot, which have been joined in various ways. Single layer flat panel lines belong to relatively simple shapes, so they are more suitable for simple, luxurious, and modern style door jamb positions.
Stone door pocket line style 2: thickened flat line
Thickened flat line
Thickened flat line
When using thickened stone slabs to make door jamb lines, the width of the door jamb line is generally around 80mm-150mm, which should not be too wide or too narrow. There are mainly beveled edges, large beveled edges, arc edges, grooved titanium bars, grooved copper bars, and grooved joints in various ways. Thickened stone slab lines also belong to relatively simple shapes, so they are more suitable for simple, luxurious, and modern style door jamb positions.
Stone door pocket line style three: linear lines
Line type lines
Line type lines
The width of the door pocket line with linear lines is generally between 70 and 120, which is not too narrow. However, the width can be appropriately widened according to the size of the door opening. The style of the lines can also be simplified or complicated based on the complexity of the style. Linear line door jambs are suitable for European, American, French and other complex decoration styles of door jambs.
These three types of stone door jamb line styles are the most commonly used methods, but there are also other methods that need to be customized according to specific needs.
Among these three types of styles, a 10mm or so horse tooth can be left for the inner panel of the door jamb and the line of the door jamb. The main consideration is to avoid the inner panel and the inner side of the door jamb being on the same surface, and to leave the seam on the inner surface; Convenient installation; Add styling; Add layers.
Post time: Oct-30-2023